© PAN Acoustics 2024
Pan Acoustics GmbH
Schweigerstr. 13d
38302 Wolfenbüttel
T +49 5331 900 95 70
F +49 5331 900 95 79
contact@pan-acoustics.de
www.pan-acoustics.de
© PAN Acoustics 2024
Pan Acoustics GmbH
Schweigerstr. 13d
38302 Wolfenbüttel
T +49 5331 900 95 70
F +49 5331 900 95 79
contact@pan-acoustics.de
www.pan-acoustics.de
PAN ACOUSTICS - THE SOUND SPECIALIST FOR CRYSTAL-CLEAR communicatION
IN ACOUSTICALLY challengING ENVIRONMENTS. Benefit from the innovative
developments of The legendary PAN technologies from our german -
Lower Saxony manufacture.
It has never been easier to turn old into new.
Power supply, audio data and control - all over a conventional two-wire cable as found in a classic, passive speaker setup or a 70/100V installation. This is made possible by our in-house developed Pan Acoustics Pan 2-Line technology, which transforms a passive sound reinforcement system into an active solution.
The highlight: the active, digitally controllable line array loudspeakers from the Pan 2-Line series can be integrated directly into the existing cabling of the previous installation. The building fabric remains untouched. This is ideal for the preservation of historical monuments and it reduces total system costs.
Consulting | Planning support | Commissioning | Workshops
You need the right sound reinforcement solution for your project or are looking for support in choosing the right products? You don't get anywhere with off-the-shelf loudspeakers and are dependent on a special design? Would you like to learn more about our products and audio technologies?
We are here for you!
Products » PAN 2-Line » CCU 4/4
The master unit of a Pan 2-Line system. The CCU 4/4 provides four Pan 2-Line connections for a two-wire system with any polarity. Each Pan 2-Line output has its own audio input. With Pan 2-Line technology, audio, control data and the power supply can be transmitted via two wires (2-wire) such as loudspeaker cables or cables from an existing 100V installation.
| Configuration: | Central Control Unit for Pan 2-Line systems |
| Audio inputs: | 4 balanced line inputs |
| Pan 2-Line outputs: | 4 on 2-pin plug contact |
| Media control: | yes via R232 / RS485 |
| Status LEDs: | Fault, operation, communication |
Dimensions (H x W x D): | 88 x 483 x 300 [mm] |
Individual lacquering / colouring in the RAL system. Other colour systems such as RAL design, Pantone etc. are possible on request.
Individual cabinet length of the speaker is possible. The enclosures of the Pan Speaker series can be customised to customer dimensions.
Analog audio inputs with balanced signal routing
Digital audio input: supports 2 x AES/EBU (AES3) and 1 x anlaog audio (failover function)
Digital audio network DANTE incl. AES67 support. Supports redundant network structure with Pan Net control and 1 x analogue audio (failover function).
100V audio inputs with different power taps.
Pilot tone evaluation for integration in SAA/ ENS systems.
Pan Net - Pan Acoustics' proprietary control and monitoring protocol.
General Purpose Output (GPO) Switchable contact e.g. for status request by means of downstream media control.
Priority switching - Automatic switching of the audio inputs, e.g. between program and announcement.
DC input for operation on emergency power supplies.
Weatherproofing of the loudspeakers can be achieved via protection classes IP54 or IP65 (depending on the model).
Accessories such as wall, stand and ceiling mounts, various interfaces, connection cables, weather protection hoods and connection sets are available.
Ball throwing safety
Pan Acoustics' products are defined by natural sound and appealing design.
© PAN Acoustics 2024
Pan Acoustics GmbH
Schweigerstr. 13d
38302 Wolfenbüttel
T +49 5331 900 95 70
F +49 5331 900 95 79
contact@pan-acoustics.de
www.pan-acoustics.de
Datasheet
2D CAD files